Descubre el SWITCH 10/100/1000 de 8 puertos inteligentes administrados DS-3E1508-EI(0-STD) de HIKVISION, una solución perfecta para optimizar tu red empresarial. Este switch proporciona un rendimiento excepcional con soporte para velocidades de hasta 1 Gbps, permitiendo una transmisión de datos rápida y eficiente.
Entre sus características destacadas, incluye administración fácil y eficiente, ideal para configuraciones tanto sencillas como complejas. Su diseño compacto permite una instalación flexible en cualquier entorno, y su tecnología avanzada garantiza un funcionamiento estable y seguro. Con características de gestión de tráfico y priorización de datos, este switch se adapta a las necesidades específicas de tu red.
Diferénciate de la competencia con este producto que combina tecnología de vanguardia, facilidad de uso y eficiencia energética. Potencia tu conectividad y optimiza tus recursos con el SWITCH 10/100/1000 de HIKVISION, la elección inteligente para tu infraestructura de red.
- General
- Shell Metal material, fan-free design
- Net Weight 0.36 kg (0.79 lb)
- Gross Weight 0.660 kg (1.46 lb)
- Dimensions (W × H × D) 170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')
- Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
- Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
- Operating Humidity 5% to 95% (no condensation)
- Relative Humidity 5% to 95% (no condensation)
- Power Supply 5 VDC, 1 A
- Installation Mode Desk-Mounted;Wall-Mounted;
- Max. Power Consumption 5 W
- Power Consumption in Idle 3 W
- Surge Protection 6 KV
- Network Parameters
- Ports 8 × Gigabit RJ45 port
- MAC Address Table 4 K
- Switching Capacity 16 Gbps
- Packet Forwarding Rate 11.91 Mpps
- Internal Cache 1.5 Mbits
- Software Function
- Link Aggregation Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation.Support 2 aggregation groups.
- HPP Support one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.2. Display the port bandwidth utilization rate.3. Display topology information.4. Display the alarm status.5. Restart ports and devices.6. Remotely upgrade the device.
- Port Isolation Ports 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP. Support 802.1w RSTP.
- VLAN VLAN is used for network scale planning and network health improvement.Support 802.1Q.Configurable VLAN ID from 1-4094.Support Trunk, Access port mode.Support Max. 32 VLAN.
- System Maintenance Support device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.Support management via Hik-Central Pro.Support remote management via Hik-Partner Pro.Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.Supports 802.1ab LLDP for peer device discovery.Support SNMP v1/v2c for third-party management platform access.Support port mirroring for fault locating.
- Approval
- EMC CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),FCC (47 CFR Part 15, Subpart B),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
- Safety CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
- Chemistry CE-RoHS (201165EU);WEEE (201219EU);Reach (Regulation (EC) No.19072006)
